Transfer of gas meter readings and payment for services

Calculation according to consumption standards

Procedure for payments for natural gas according to consumption standards

If the consumer does not have a gas meter (meter), gas consumption is determined in accordance with established consumption standards. When calculating gas fees for the population, the following parameters are taken into account:

gas consumption standard (for calculation in equal shares throughout the year);
size (area, volume) of heated residential and non-residential premises;
the number of persons permanently and temporarily registered in the premises;
type and number of farm animals and poultry kept on private farms;
the degree of improvement of an apartment or residential building (presence or absence of centralized hot water supply);
other information necessary to correctly determine the amount of payment for consumed gas.

According to clause 56.2 of the Rules for the provision of utility services to owners and users of premises in apartment buildings and residential buildings, approved by Decree of the Government of the Russian Federation No. 354 of May 6, 2011, in the absence of citizens permanently or temporarily residing in the residential premises, the volume of utility services is calculated taking into account the number of owners of such premises.

Example:

Heated living area – 35 m2;

Bath area – 10 m2;

Number of living citizens – 3 people;

There is no gas meter.

Gas appliances are installed and connected to the gas supply system in the household: heating boiler - 2 pcs.; gas stove – 1 pc.

The areas of use of natural gas by the population are heating (residential buildings) and (or) heating of non-residential premises with the simultaneous use of gas for other purposes.

The fee for the current month is calculated as follows:

35 m2 x 7.8 m3/m2 x 5,329.49 rub./1000 m3 = 1,454.95 rub.

Does payment for gas without a meter depend on the number of registered ones?

Yes, it depends. If there is no gas meter, then payment is according to the standards.32. If subscribers (individuals) do not have gas meters, the volume of gas consumption is determined in accordance with gas consumption standards. Standards and norms for gas consumption are approved in the manner established by the Government of the Russian Federation.

33. Gas consumption standards are established for the following types of consumption:

a) cooking;

b) heating hot water in the absence of a centralized hot water supply (using a gas water heater, and in its absence, using a gas stove);

c) heating of residential premises in apartment buildings, residential premises and premises for auxiliary use, intended to satisfy citizens’ household and other needs related to their residence in residential buildings;

d) heating of non-residential premises in apartment buildings and premises in outbuildings of households;

(as amended by Decree of the Government of the Russian Federation dated May 14, 2013 N 410)

e) keeping farm animals and poultry on a private farm.

34. The gas consumption rate is the average monthly gas consumption for the following purposes:

a) cooking and heating water in the absence of a centralized hot water supply - per 1 person per month;

b) heating of residential premises in apartment buildings and residential buildings - per 1 sq. meter of total area of the specified premises per month;

c) heating of non-residential premises in apartment buildings, auxiliary premises in residential buildings and premises in outbuildings of a household - per 1 cubic meter. meter of heated room volume per month;

(as amended by Decree of the Government of the Russian Federation dated May 14, 2013 N 410)

d) preparation of feed and heating of water necessary for keeping farm animals and poultry on a private farm - per 1 animal or bird of a certain species, respectively.

35. The volume of gas consumed, determined in accordance with gas consumption standards, in the billing period is calculated in the following order:

a) when using gas for cooking and heating water using gas appliances - as the product of the number of citizens living in a residential area and the established gas consumption standard for the corresponding type of consumption;

b) when using gas for heating residential premises, including auxiliary premises in an apartment of an apartment building - as the product of the total heated area and the gas consumption standard established for these purposes;

c) when using gas for heating non-residential premises in apartment buildings, auxiliary premises in residential buildings and premises in outbuildings of a household - as the product of the total volume of these premises and the gas consumption standard established for these purposes;

(as amended by Decree of the Government of the Russian Federation dated May 14, 2013 N 410)

d) when using gas for preparing feed and heating water necessary for keeping farm animals and poultry on a private farm - as the sum of the products of the number of animals and birds of a certain type and the gas consumption standards established for these types of animals and birds.

36. If the actual connection of the gas pipeline included in the in-house gas equipment to the gas distribution (connected) network was not carried out from the first day of the billing period, the volume of gas consumed is determined in proportion to the number of days in the billing period after the specified connection, including the day of connection.

37. The volume of gas consumed during the billing period by a subscriber living in a room in an apartment (residential building) and determining the payment for gas consumed according to the readings of an intra-apartment (common house) gas meter is calculated as the product of the volume of gas consumed according to the readings of this device and a coefficient defined as :

the share of the living area of the room in the heated total area of the apartment (residential building) - in the presence of individual heating using gas appliances;

the share of the number of citizens living in a room in the total number of citizens living in an apartment (residential building) - in the presence of centralized heating.

38. The volume of gas consumed when used for several types of consumption is calculated by summing the volumes of consumed gas used for each type of consumption.

39. Depending on the method of processing payment documents established by the contract when paying for supplied gas, information about the volume of gas consumed is indicated by the subscriber in the payment receipt or communicated to the gas supplier in the manner provided for in the contract.

Calculation according to consumption standards

(heating of a residential building);

3 people x 16.86 m3/person. x 5,329.49 rub./1000 m3 = 269.57 rub. (food preparation and water heating);

10 m2 x 5.08 m3/m2 x 5,329.49 RUR/1000 m3 = 270.74 RUR. (bath)

1,454.95 + 269.57 +270.74 = 1,995.26 rubles. – accrued to the subscriber for the month, where:

7.8 m3/m2 – gas consumption standard for individual (apartment) heating of residential premises (residential buildings, apartments, rooms), according to Order of the Tariff Regulation Committee of the Volgograd Region dated April 15, 2020 No. 12/3;

16.86 m3/person. – gas consumption standard for the direction of use - cooking in the absence of a gas water heater and central hot water supply, according to Order of the Tariff Regulation Committee of the Volgograd Region dated April 15, 2020 No. 12/3;

5.08 m3/m2 is the standard for natural gas consumption by the population in the absence of gas meters for heating baths, according to Order of the Tariff Regulation Committee of the Volgograd Region dated April 15, 2015 No. 12/3;

RUB 5,329.49 – from July 1, 2020, the retail price of 1000 m3 of natural gas in the direction of use, regardless of the presence (absence) of the metering device “Heating (of residential buildings) and (or) heating of non-residential premises with the simultaneous use of gas for other purposes,” according to clause 5 Appendix to the Order of the Tariff Regulation Committee of the Volgograd Region dated June 27, 2020 No. 20/1.

The total volume of gas consumed when used for several types of consumption is calculated by summing the volumes of consumed gas used for each type of consumption.

If during the verification process it is established that the subscriber did not inform the gas supplier about changes in circumstances affecting the determination of the volume of gas consumed that occurred after the conclusion of the contract, or provided information the unreliability of which is confirmed by authorized executive authorities or local government bodies, the gas supplier has the right to recalculate the volume of supplied gas subscriber and the amount of payment for it for the period from the date of the previous inspection, but not more than 6 months.

Changes in the receipt will be minor and will affect only those consumers who use a meter (meter) to calculate payment for the resource consumed. Subscribers who pay according to consumption standards will receive a receipt that is familiar in appearance and content.

Changes are made for the convenience of subscribers. The updated receipt type and calculation procedure will save time and make the calculation formula more simplified and streamlined. Now payment for gas will be made in the same way as payment for electricity or payment for gas without a meter - for the current month. Thus, now all subscribers (both those who pay by meter and those who do not have one) are switching to a unified payment system for consumed gas.

The receipt that subscribers will receive in August is not particularly different from the one they are already accustomed to. The difference lies in the method of payment based on the receipt - for the gas actually consumed in the current month. We took the meter readings, calculated the amount and paid it immediately.

The amount of debt in the payment document will indicate a delay in payment for consumed natural gas, for which penalties may be charged.

Let us emphasize once again: if you do not have a gas meter installed, then you will receive a fully completed receipt, which already indicates the amount to be paid. That is, the form of the payment document and the payment method for subscribers without meters (payment according to the standard) do not change.

The changes apply only to those subscribers who pay for gas according to meter readings.

1. Sample of filling out a payment document invoice for meters with temperature correction

You need:

Get the volume of current consumption - the difference between the current readings on the meter and previous readings
Get the amount of current consumption by multiplying the volume of current consumption by the tariff
Get the amount to be paid by adding the amount of current consumption to the amount of debt for the previous period.
Pay the total amount

Calculation example : Last readings -13150, date of last readings - 06/23/2017. Current readings - 13500, date of current readings - 07/21/2017.

We calculate the volume of current consumption: 13500 - 13150 = 350 cubic meters. meters We calculate the amount of current consumption: 350 cubic meters. meters multiplied by 6.62 = 2317 rubles. We calculate the amount due: debt 243.53 rubles. + current consumption 2317 rub. = 2560.53 rub.

2. Sample of filling out an invoice payment document for meters without temperature correction (calculation of volume with temperature coefficient)

How to correctly take gas meter readings in an apartment in 2020

Reading time: 3 minutes

Natural gas is used in apartments and private houses for cooking, heating water and heating rooms in the winter. Residents pay for the resource according to the actual volume of fuel consumed.

Consequently, every owner of a residential property must know how to take gas meter readings in order to make the next payment to the account of the gas supply organization.

To do this, you need access to a meter, which can be installed both indoors and outdoors.

Is it possible to do without a counter?

If there is no meter, the payment amount is calculated in accordance with current regional regulations. In this case, the supplier focuses on the number of registered persons in a certain residential area.

For a large family living in a house with gas heating, this approach is very unprofitable, especially in the summer. It is much cheaper to install a meter and pay for actual consumption.

For information on how to install the device, see the article “Installing a gas meter in an apartment.”

Tariffication of gas supply

Before reading your gas meter, you need to check the current tariffs for natural gas in your region.

The cost of blue fuel at the place of residence is usually indicated in the invoices that the gas supply organization sends to residents every month.

They are delivered to the address of the residential premises, for the gas supply of which an agreement has been concluded with its owner. Some organizations may send invoices by email upon request from consumers.

In the receipt, the cost of the resource is indicated for a volume equal to 1 m³. Depending on the region, the tariff varies from 4.4 to 6.2 rubles per 1 m3.

How to take meter readings

So that when calculating the cost of fuel actually consumed per month, you do not end up with an astronomical amount, you need to remember how to correctly take readings from the gas meter in your apartment.

To begin with, let us mention that the device shows the total amount of fuel consumed since installation. It does not have a function that would show data only for the past month.

Therefore, the consumer must:

Write down the actual indicator at the moment.
Subtract from it the amount that the device showed last month.
Previous data can be viewed on the invoice receipt. The supplying organization indicates the indications for which the last payment was made.

The result will be the volume of gas consumed during the month.

Now let’s discuss how to look at the gas meter readings so that the calculation of the amount is correct. Looking at the device, the user sees a display in which the numbers are separated by a comma.

There are always three digits after the decimal point, which are reset to zero whenever consumption exceeds the next step, and then the counting begins again.

When taking readings, you should ignore everything after the decimal point and write down only the readings before it. Of course, leading zeros also do not need to be taken into account.

On some meters, the last three digits are highlighted in red or even placed in a separate field. In this case, the resident needs to ignore the number highlighted in red or listed in the right field, otherwise they will receive an incorrect reading.

Different manufacturers produce individual meters for measuring gas consumption in various designs. The manufacturer usually highlights figures somehow that the consumer does not need to consider when paying their monthly bill. In any case, the last three numbers on the scoreboard will be different in some way - a different color, frame, and so on.

If the gas meter is electronic, its display does not highlight the numbers in a different color or frame. In this case, only the comma matters, so you should ignore the readings after it.

Where to report meter readings

Typically, gas supply organizations themselves calculate the payment amount based on the meter readings reported by the consumer. The obligation of citizens to regularly provide such data is enshrined in law.

The supplying organization at the location of the residential premises determines how to submit testimony. Most often, users do this by phone, the number of which is always indicated on invoices.

In some regions, it is possible to transfer data via the Internet in the subscriber’s personal account on the website of the supplying organization.

Bill payment

Payments for gas supply must be made monthly. This can be done through a bank cash desk or at Russian Post offices using a receipt received from the supplier.

The most convenient way is remote payment via the Internet, when all actions can be performed at home.

To make online payments you need to have an online banking account or an e-wallet. In most cases, you will have to enter the recipient's payment details yourself.

The Sberbank Online system already contains details of domestic gas suppliers throughout Russia. The consumer just needs to select the region and name of the organization in his city, and the system will automatically fill in the necessary information.

Results

To calculate the monthly payment amount, you need to determine what numbers to write. Meter readings should be submitted to the gas supply organization every month and bills should be paid on time. Otherwise, debt will begin to accumulate.

Source: https://pravovdom.ru/zhkx/pokazaniya-gazovogo-schetchika.html

Gas tariffs from July 1, 2020 for the population

meters/day

We count the number of cubic meters. meters of gas consumed each month:

June 2020 - 12.5 cu.m. meters/day multiplied by 7 days of June = 87.5 cubic meters. m July 2020 - 12.5 cubic meters. meters/day multiplied by 21 days of July = 262.5 cubic meters. m

We calculate the volume of gas taking into account the coefficients: June 2020 - 87.5 cubic meters. m multiplied by 1.00 = 87.5 cubic meters. m July 2020 - 262.5 cubic meters. m multiplied by 1.00 = 262.5 cubic meters. m

We calculate the cost of consumed natural gas:

June 2020 - 87.5 cu.m. m multiplied by 6.62 = 579.25 rubles. July 2017 - 262.5 cubic meters. m multiplied by 6.62 = 1737.75 rubles. Only 579.25 rub. + 1737.75 rub. = 2317.00 rub.

Attention! Confirmation of the fact of payment for consumed natural gas is a check order issued by the organization that accepted your payment, and not a completed payment document. Therefore, in order to avoid errors when crediting a payment, always check that the data you filled out on the payment document matches the data on the check order.

Home page / Information for consumers / Individuals / Procedure for calculating gas fees / Calculation according to consumption standards

Calculation according to consumption standards

Procedure for payments for natural gas according to consumption standards

gas consumption standard (for calculation in equal shares throughout the year);
size (area, volume) of heated residential and non-residential premises;
the number of persons permanently and temporarily registered in the premises;
type and number of farm animals and poultry kept on private farms;
the degree of improvement of an apartment or residential building (presence or absence of centralized hot water supply);
other information necessary to correctly determine the amount of payment for consumed gas.

According to clause

Features of gas metering

The widespread installation of gas meters indicates the fact that paying for actual consumption is much more profitable than paying according to standards. The fixed monthly fee includes the gas consumption of each person registered in an apartment or house, regardless of whether the person lives there or not. If there are more than three residents, then the amounts are impressive. For those who have autonomous gas heating in their home, installing a meter solves the problem of heating their home, despite the seasonality.

Installing a meter in an apartment is beneficial

Gas meter charges may vary depending on the area in which a person lives and which company provides this service. Therefore, before calculating the payment for gas according to the meter, it is worth familiarizing yourself with complete information about the period in which it should be paid and the cost of 1 cubic meter. m. fuel. All this is indicated on the supplier’s website or can be found out directly at the branch.

If you want to know your tariff, you need to pay attention to the following:

the presence of a gas stove and water heater;
the presence of a gas stove without a water heater;
stove and central heating
stove without heater and central heating.

Depending on what criteria your home meets, tariff plans are set. Once the tariff is determined, you can easily calculate the amount of gas consumed over a certain period.

The consumer is obliged to take and transmit readings from the meter to the supplier company on a monthly basis. This can be done in your personal account on the website, by phone or directly at the branch. The transfer is made from the 20th to the 25th of the current month, but no later than the 10th of the next. If for some reason the gas company has not received readings, it can calculate gas payments based on average monthly consumption, based on previously provided data for a period of no more than a year.

Payment for supplied gas is made on the basis of payment documents from the supplier sent to each subscriber. In the payment slip, the consumer independently enters meter readings in special columns.

Price, fee calculation and gas bill

56.2 of the Rules for the provision of utility services to owners and users of premises in apartment buildings and residential buildings, approved by Decree of the Government of the Russian Federation No. 354 of May 6, 2011, in the absence of citizens permanently or temporarily residing in the residential premises, the volume of utility services is calculated taking into account the number of owners of such premises.

Example:

Heated living area – 35 m2;

Bath area – 10 m2;

Number of living citizens – 3 people;

There is no gas meter.

Gas appliances are installed and connected to the gas supply system in the household: heating boiler - 2 pcs.; gas stove – 1 pc.

The areas of use of natural gas by the population are heating (residential buildings) and (or) heating of non-residential premises with the simultaneous use of gas for other purposes.

The fee for the current month is calculated as follows:

35 m2 x 7.8 m3/m2 x 5,329.49 rub./1000 m3 = 1,454.95 rub.

(heating of a residential building);

3 people x 16.86 m3/person. x 5,329.49 rub./1000 m3 = 269.57 rub. (food preparation and water heating);

10 m2 x 5.08 m3/m2 x 5,329.49 RUR/1000 m3 = 270.74 RUR. (bath)

1,454.95 + 269.57 +270.74 = 1,995.26 rubles. – accrued to the subscriber for the month, where:

The total volume of gas consumed when used for several types of consumption is calculated by summing the volumes of consumed gas used for each type of consumption.

The amount of debt in the payment document will indicate a delay in payment for consumed natural gas, for which penalties may be charged.

The changes apply only to those subscribers who pay for gas according to meter readings.

1. Sample of filling out a payment document invoice for meters with temperature correction

You need:

Get the volume of current consumption - the difference between the current readings on the meter and previous readings
Get the amount of current consumption by multiplying the volume of current consumption by the tariff
Get the amount to be paid by adding the amount of current consumption to the amount of debt for the previous period.
Pay the total amount

Calculation example : Last readings -13150, date of last readings - 06/23/2017. Current readings - 13500, date of current readings - 07/21/2017.

2. Sample of filling out an invoice payment document for meters without temperature correction (calculation of volume with temperature coefficient)

You need:

Get the volume of current consumption - the difference between the current readings on the meter and previous readings
Calculate the volume of gas taking into account temperature coefficients
Get the amount of current consumption by multiplying the volume of current consumption taking into account the coefficients by the tariff
Get the amount to be paid by adding the amount of current consumption to the amount of debt for the previous period.
Pay the total amount

Calculation example : Last readings -13150, date of last readings - 06/23/2017. Current readings - 13500, date of current readings - 07/21/2017.

Temperature coefficient for June 2020 1.00; July 2020 - 1.00.

We calculate the difference in readings 13500 - 13150 = 350 cubic meters. meters We count the number of days from the current readings to the latest - it turns out: June 2020 - 7 days July 2020

How to pay for gas by meter, how to calculate payments in 2020

How to pay for gas using a meter When making calculations, you always need additional literacy and vigilance. If a person is not sure that he can make mathematical calculations correctly, he should use a calculator.

- common sense;
- serious assessment of the situation;
- law-abiding

Instruction 1 If you do not like the system of paying for gas by meter, you can refuse this method of accounting and return to paying at the standard tariff. In some cases, this may be more beneficial for you (if each person in the family consumes more than 30 cubic meters of gas per month).

Recalculations made during the period at the request of the Subscriber (registration/deregistration, etc.).
Payments received from the 1st day of the month of the receipt to the date the receipt was generated.
Total payable - the amount of payment taking into account: debt/overpayment on the 1st day of the month, receipts, recalculations and payments in the period.
Additional information from a specialized organization.
When paying a meter receipt for consumed gas, you must give the following to the cashier operator, or independently indicate in the terminal device:

Personal account (required 9 characters) – 2,
Gas meter reading – billable gas meter reading (m3), or “0” (zero), in case of repayment of debt for consumed gas – 6.
Amount to be paid – 5.

2.2.Sample for manually filling out a payment document invoice-receipt (by meter).

Those gas consumers who have gas meters installed do not always know how to correctly calculate the amount to pay based on the recorded readings. Our specialists talk about the details of such a procedure in this article.

We use the gas meter correctly Usually, Russians install devices in their apartments and private houses to monitor gas consumption. They have simple rules for use, and taking readings from them is quite simple.

The main thing is that under no circumstances should you:

do not open the device;
Do not tighten the bolts and nuts.

Each of these meters is equipped with a mechanical display, which displays the current readings of the resource consumed, in our case natural gas. These indicators correspond to the total amount of consumption, so for payment it is necessary to record only certain figures.

Before purchasing, it is better to check with them which meter they will agree to install. Agree with the company installing the meters about a specific time for installing the devices. Payment by gallus meters with smart cards The total amount, information about the debt (if any), personal account number, and so on, including consumption standards, signature and current date. Also, many receipts contain complete information about the organization in whose name payments are made (address, telephone, email, etc., including operating hours). From personal experience, it is much more convenient to pay for utilities via the Internet, fill out the form once, register, you receive a single payment number (gas, electricity, water) for all utilities and simply enter the amount to be paid, the sample is saved on the website. True, you need to open a bank account (replenish it periodically); payments for services are made from this account. Content:

How to pay for gas by meter via the Internet
Payment procedure and methods
Payment by gallus meters with smart cards
LLC Gazprom Mezhregiongaz Smolensk:
How to pay for gas using the meter correctly
Payments for gas by meter
How to fill out a receipt for a gas meter (sample)?
How to pay for gas using a meter

How to pay for gas at the meter via the Internet In order to avoid such misunderstandings, you need to know how to fill out the payment receipt correctly, and also clearly indicate the algorithm for paying for gas at the meter. Pay for gas using the meter: recommendations from experts First of all, the consumer must understand that all calculations are carried out at the state level. That is why any claims against regional officials will be rejected due to their groundlessness. Users need to correctly calculate the number of cubic meters of gas used according to the following principle:

write down the first five numbers on the gas meter dial on a piece of paper;
open a book using which utility bills are paid;
find last month’s indicators and transfer them to paper;
from the indicators that were taken in real time, subtract the numbers written out from the book for the last month;
the resulting number will indicate the amount of gas used in the flow month;
the user must find out what price is indicated for one cubic meter of gas - this indicator is present in the user book used to pay for services and multiply the number of cubic meters by this price.

After performing all these manipulations, the person needs to start filling out the account book.

Format of a receipt for payment for natural gas Samples of filling out receipts for payment for consumed gas 1. Sample of filling out a payment document for an invoice-receipt (according to the standard).

Receipt generation date.
Personal account (required 9 characters).
Details of Gazprom Mezhregiongaz St. Petersburg LLC for transferring payment for consumed gas.
The status of settlements on the date of generation of the receipt is information about the presence of debt (100) or overpayment (-100) on the date of generation.
Total payable - the amount of payment excluding debt or overpayment as of the date the receipt is generated (excluding clause 2).

When paying a receipt according to the standard for consumed gas, you must give it to the cashier operator, or independently indicate in the terminal device:

Personal account (required 9 characters) – 2,
Amount to be paid – 5.

2. They are not recorded in the subscriber book, so the company that produces meters for gas consumers specifically outlines the second block in red. This is done so that the user does not mistakenly enter them into the subscriber book as current indicators. Let's look at how the readings of a digital gas meter are correctly recorded using an example. So, on the digital display there are eight numbers: five on the left before the decimal point and three on the right after the decimal point - 00291.415. Only the first five digits located to the left of the decimal point – 00291, but without “zeros” are recorded in the subscriber book. That is, you need to record only three numbers out of five - 291 (these will be the consumed cubic meters of gas). The numbers after the decimal point - 415 - are not written down anywhere. Correctly counting the gas consumed by the meter for payment To do this, you will need information about the readings from the same device for the past reporting period.

Payment for gas, as well as other utility bills, is becoming a priority in the finances of every Russian family that receives bills for the use of gas in the household. Employees of gas supply companies are the most intolerant of late payments. But their zeal is justified by paragraph 117 of Article XI of Government Resolution No. 354, which was amended in September 2020.

This is interesting: When to transmit electricity meter readings - main periods 2020

We must pay tribute to our native state that the problem of directly paying for gas does not exist at all. There are many ways to pay for the consumption of national property by the people themselves.

All banks with state shares, as well as most commercial banks.
Post office.
Payment terminals and systems.
Offices of Gazprom Mezhregiongaz enterprises.
Mobile operators.
Personal account on the supplier’s website.
According to the housing and communal services receipt along with other utilities.

The difference lies in the commission fees. Third-party organizations such as banks, post offices, mobile operators, payment systems carry out transfers and charge a commission. Moreover, even one enterprise that has entered into an agreement to accept payments does not have a constant figure for commission fees. Thus, it is impossible to find out the cost of the service on the Russian Post website. It is indicated only directly at the post office with a special announcement. The same thing with Sberbank. Different regions, different amounts. And at the supplier’s offices, through terminals, in the consumer’s personal account, you can pay for gas without a commission and without queuing.

The most convenient, but not yet the most common way is via the Internet, by registering in the supplier’s personal account. For those who are faced with such a need for the first time, but do not want to stand in queues, you should try Sberbank online, which describes step by step how to pay for gas. But in Mezhregiongaz’s personal account you don’t need to know how to calculate or how to calculate the amount to be paid. Everything there is calculated automatically after entering the meter readings.

The legislator requires the consumer to take gas meter readings and transfer them to the supplier on the last days of the billing month. Based on these readings, a receipt is generated, which must be paid by the 10th day following the billing month. This period is established by the Housing Code in Article 155

. Unlike communal services, where the moment of payment is stipulated in the contract, for suppliers of natural resources the 10th is the date of payment for the service. Of course, it is not forbidden to pay earlier. The Gazprom website informs you how to pay correctly for consumed gas. Representatives of the gas supplier pay special attention to the transmission of gas meter data. If you do not have time to pay before the 10th, then a penalty will simply arise. But if you don’t provide gas meter readings, then unnecessary worries will begin about eliminating the debt that will appear on the receipt. Since the program does not take the latest readings itself, but immediately switches to the average annual accrual. Of course, the situation can really be corrected, but to do this you will have to:

go to the office of the gas service company;
write an application requesting to change the amount calculated for payment;
wait for the controller to read new data on the meter;
and only after some time, not determined by anyone, will the situation return to the right direction.

You can also pay for the gas you consume in advance. But this does not cancel the mandatory submission of meter readings. Because when writing off amounts from the advance payment, the program will again calculate the cubic meters of fuel that are entered in its data. If they are not there, then everything will happen as described above. That is, the consumer will have to pay not for the fuel actually used, but for the theoretically calculated one. But the penalty will not appear.

The most incomprehensible thing about paying for gas is the tariffs. Tariff – the price set for 1 cubic meter of used “national property”. The regional authorities are responsible for setting prices for the consumption of natural resources. But they are approved by the Federal leadership. Prices have the unpleasant property of changing. Recently, the change occurs on July 1st. You can only follow price changes and understand their nature if you really want to.

Official websites of a given focus provide explanations and explanations of the reasons for the change, and in fact, the increase in cost. You can look at this philosophically. Resolution of the Government of Russia No. 1021 “On state regulation of gas prices, tariffs for services for its transportation ...” will help you understand the essence.

The principles for the formation and regulation of tariffs are set out in
Article IV
.

Dissatisfaction cannot be expressed to the management company if there is a payment agreement through them. All prices indicated in the receipt for gas consumption are set by the State, and there are no markups by intermediaries. For now, the installation of natural resource measuring instruments in the country is not mandatory. But a simple comparative calculation shows that paying for gas using a meter is many times more profitable than paying at the average established tariff.

The average tariff for using a stove is based on the number of people living in the apartment. Although each individual tenant does not personally boil the kettle. The heating tariff is related to the area of the apartment. But the already established tariff does not imply savings. And you can look at the meter and calculate the possible consumption. The benefits of paying for gas using a personal meter are obvious.

The principle of taking readings from a gas meter is no different from an electric meter. To calculate the amount to be paid, you need to subtract the previous readings from the current readings and multiply by the tariff currently in force in a particular area. Nothing complicated. It is advisable to count the cubic meters used per hour for residents of private houses, where one meter shows the use of blue fuel in several directions. And in an apartment this is appropriate when there is a gas water heater or if there are heat meters. Then, using battery adjustment, it becomes clear how to pay less.

You must understand that all reading devices require subscriber service, which includes inspection of the technical condition of the device. To do this, it is necessary to ensure the admission of a specialist, which can also be an inconvenience.

How to pay for gas using the meter correctly

Natural gas is the most important and probably the most in demand resource, which guarantees us comfortable living conditions at home and at work. Naturally, every conscious person perfectly understands the need to pay for the volume of gas that was used during the month.

Unfortunately, due to many factors, consumers are presented with figures from their utility bills that seriously frighten the majority of our compatriots. Indeed, very often you have to choose between the opportunity to purchase the desired item and the need to pay utility bills on time.

This is interesting: Betar gas meter: battery replacement 2020

Citizens who have installed meters at home to control the amount of electricity and natural gas consumed feel more comfortable in this regard. They pay about half as much for gas as those who are used to living the old fashioned way and did not install meters.

Voluntary control over the amount of gas used allows not only to rationally spend the family budget, but also makes people more disciplined. True, sometimes it is quite difficult for people to understand the tariffs and fill out the receipt correctly.

Actually, this is not surprising, because it is difficult for a person who is not particularly interested in economics and does not follow government regulations and recommendations to understand the formulas by which the cost of blue fuel is calculated. He has to devote a lot of time to studying various tables, explanations and applications. But even a scrupulous study of these documents often does not give the desired results. As a result, next month the consumer sees a tidy sum in the “Debt” column.

In order to avoid such misunderstandings, you need to know how to fill out a payment receipt correctly, and also clearly indicate the algorithm for paying for gas at the meter.

First of all, the consumer must understand that all calculations are carried out at the state level. That is why any claims against officials at the regional level will be rejected due to their groundlessness.

In order not to waste time and nerves, it is recommended to carefully study the following recommendations from specialists, following which the consumer will be able to correctly fill out a payment receipt and pay utility bills on time.

According to the requirements of the legislation of the Russian Federation, the consumer is obliged to pay for utilities no later than the 10th day of the month following the billing month.
The gas supplier generates a payment receipt by the end of the month. In this case, the citizen is obliged to provide real meter data within the period specified in the relevant agreement. In order not to be surprised later on where a certain value of the debt amount appeared in the “Debt” column, the consumer is recommended to provide the gas supplier with meter data before the 1st day of the month, which comes after the billing month.
If the consumer paid for the gas at the meter before the end of the current month, then no misunderstandings should occur. This is as convenient as possible, since timely provided meter data will be taken into account when generating a future receipt.
If for some reason a person is unable to pay the gas bill before the end of the billing month, then in order to avoid confusion, he is recommended to simply provide the service provider with the meter readings. This is the only way to hope to receive a correctly formed receipt. Gas equipment indicators can be submitted to the appropriate organization in several ways. Namely: call the operator, fill out a form on the website or send a letter to the address of the site that serves the consumer. In this case, the citizen must indicate his data (full name, address, personal account number). In any case, the person is obliged to pay the receipt by the 10th of the next month.
Despite the fact that the consumer provided the gas meter data to the supplier on time, if he does not pay for gas by the 10th day of the next month, he will be charged a penalty in the amount specified in the contract.
Confusion and incomprehensible charges arise when a person does not submit meter readings by the 1st day. Even if payment is made on time, the consumer may see a certain amount in the “Debt” column. This happens because the calculation is carried out for the entire period using the coefficient of average monthly indicators.
Bills with average monthly indicators will be regularly sent to the consumer even if he did not provide the gas meter readings to the service provider on time just once. At the same time, the debt will increase every month. To avoid this, subscribers are advised to contact their department with a request to recalculate. After submitting a written application, the controller is obliged to take the meter readings and draw up a corresponding act on this matter. At the end of this bureaucratic procedure, gas metering will be resumed for the consumer according to the meter readings.

Gas consumption rates without a meter per person

Yes, such a possibility exists. If the subscriber wishes to pay for gas using the meter in advance, then in the receipt he must indicate the actual data of the gas meter as of the specific date of payment. Next, you need to enter the amount that the consumer prefers to pay as an advance.

In the future, it is recommended that the consumer submit the actual meter data to the service provider by the 1st of the following month. If this recommendation is ignored, then an amount determined by the average monthly billing period will be deducted (written off) from the amount of the advance payment. Thus, the consumer will not pay for the actual volume of gas used, but for the theoretical one, which is formed by the calculation method.

So, the gas industry is an area of increased responsibility. Remember, competent filling out of the payment receipt, timely submission of gas meter readings to the supplier, as well as regular fulfillment of the obligations undertaken, guarantees the consumer the formation of completely fair terms of payment for gas at the meter.

Users need to correctly calculate the number of cubic meters of gas used according to the following principle:

write down the first five numbers on the gas meter dial on a piece of paper;
open a book using which utility bills are paid;
find last month’s indicators and transfer them to paper;
from the indicators that were taken in real time, subtract the numbers written out from the book for the last month;
the resulting number will indicate the amount of gas used in the flow month;
the user must find out what price is indicated for one cubic meter of gas - this indicator is present in the user book used to pay for services and multiply the number of cubic meters by this price.

After performing all these manipulations, the person needs to start filling out the account book.

How to pay for gas by meter via the Internet
Payment procedure and methods
Payment by gallus meters with smart cards
LLC Gazprom Mezhregiongaz Smolensk:
How to pay for gas using the meter correctly
Payments for gas by meter
How to fill out a receipt for a gas meter (sample)?
How to pay for gas using a meter

This is interesting: Fine for a magnet on an electricity meter in 2020

Bills with average monthly indicators will be regularly sent to the consumer even if he did not provide the gas meter readings to the service provider on time just once. At the same time, the debt will increase every month.

The receipt is divided into two identical halves, which must be filled out in the same way, as they say, “as a carbon copy.” First, fill out your personal account, then your full name and address of the place where the gas meter is installed. Below we indicate for what period in months you pay for gas; it is best to write the previous month, even if you pay for the last two or more, so as not to incur a penalty. Next, fill out a table with meter readings and calculations: The first column is the readings that are currently on the meter (current readings) The second column is the readings that were in the last payment period (previous readings) The third column is the difference between the first column and the second (the volume of gas consumed ) The fourth column is the tariff on the day of payment (the price of one cubic meter of gas) The fifth column is the product of the third and fourth columns (the amount to be paid) If you have standards, then fill out the line below.

How to correctly pay for gas using a meter Paying on the Internet is always very fast and convenient, because you don’t need to stand in lines, fill out books, leave the house and waste your own time. Paying for gas by meter is a very important process. After it is completed, the user must save all receipts so that in case of disagreements with the gas workers, there is an opportunity to prove that he is right. Anyone can calculate gas correctly using a meter, because this requires just a few simple steps. When making standard calculations, a person needs to check the correctness of each of his actions, this will protect him from mistakes.

When paying for gas using any of the above methods, it is worth checking the correctness of the actions of the authorized person.

Cost of services. Calculated based on current tariffs. I had never filled out this field before; the cashier did the calculations and always indicated the required amount to pay.

A sample filling can be seen below: It is worth adding that due to the spread of electronic wallets and Internet banking, utilities are increasingly being paid online.

But before, you had to fill out receipts, and even now many people pay this way. I have long switched to payments via the Internet - it saves a lot of time.

But by installing water meters, you can pay less for water. LLC "Gazprom Mezhregiongaz Smolensk": Heating General questions The form of the receipt varies somewhat, depending on the area of residence, the Krasnodar Territory is shown below. The receipt is divided into two identical halves, which must be filled out in the same way, as they say, “as a carbon copy.” Important First, fill out your personal account, followed by your full name and address of the place where the gas meter is installed.

Below we indicate for what period in months you pay for gas; it is best to write the previous month, even if you pay for the last two or more, so as not to incur a penalty. Everyone! tell me how to calculate the payment for gas Modern systems for calculating the amount of energy resources used are usually called meters.

They have a square or rectangular shape and are mounted on walls inside or outside the room. If you do not have a gas meter installed, then you should receive an already completed receipt by email, according to which you can make payments. If you have a meter installed, then you need to fill out a receipt. We write down the full name, address, month for which we pay, meter readings (previous and month for which we pay), amount of payment. To calculate the amount, we calculate the difference between the current readings on the meter and the previous ones. Then we multiply the resulting volume of current consumption by the tariff.

Recipient details. (using the example of St. Petersburg).
Fill out your personal account (9 characters).
Date of the paid period (last day of the month).
Meter readings.

According to Russian legislation, the subscriber has the right to pay for gas consumed monthly until the 10th day of the month following the billing month, but then this payment will not be included in the payment document generated on the last day of the current month. The receipt that subscribers will receive in August is not particularly different from the one they are already accustomed to.

The difference lies in the method of payment based on the receipt - for the gas actually consumed in the current month. We took the meter readings, calculated the amount and paid it immediately.

The amount of debt in the payment document will indicate a delay in payment for consumed natural gas, for which penalties may be charged. Let us emphasize once again: if you do not have a gas meter installed, then you will receive a fully completed receipt, which already indicates the amount to be paid.

And if you do the math, it turns out that you spend 6 full baths per day or drain 250 tanks. Now you can understand how much less you will pay if meters are installed.

The first step towards installing a meter has already been taken - the decision has been made. Payment procedure and methods 5 As an alternative to various dishonest ways to “save” money, try to use the gas supplied to you more economically.

Make sure that the water heated in the gas water heater does not flow unnecessarily. Train yourself not to fully open the hot water tap - for example, when washing dishes.

In a month, such savings can give quite tangible results. Utility bills are growing at an incredible speed, you no longer know how and when it will end.

What to do to save at least a little? There is a way out. The largest amount of money goes to pay for water supply.

Counters

Electricity meter replacement certificate: sample 2020

Counters

How gas meters are changed: paid or free 2020

Counters

How to remove a seal from an electric meter: rules of procedure 2020

Counters

MFC - how to transfer meter readings 2020

Great article 0

Tell me how to calculate gas fees in a private house without a meter?

— 21 days Total 28 days

We count the number of cubic meters. meters of gas per day: 350 cubic meters. meters divided by 28 days = 12.5 cubic meters. meters/day

We count the number of cubic meters. meters of gas consumed each month:

June 2020 - 12.5 cu.m. meters/day multiplied by 7 days of June = 87.5 cubic meters. m July 2020 - 12.5 cubic meters. meters/day multiplied by 21 days of July = 262.5 cubic meters. m

We calculate the cost of consumed natural gas:

June 2020 - 87.5 cu.m. m multiplied by 6.62 = 579.25 rubles. July 2017 - 262.5 cubic meters. m multiplied by 6.62 = 1737.75 rubles. Only 579.25 rub. + 1737.75 rub. = 2317.00 rub.

Consumption standards

Order of the Tariff Committee of St. Petersburg

dated 08/22/2012 No. 250-r

On establishing standards for the consumption of utility services

on the territory of St. Petersburg for natural gas (Extract)

In accordance with Decree of the Government of the Russian Federation dated May 23, 2006 No. 306 “On approval of the Rules for establishing and determining standards for the consumption of utility services”, Decree of the Government of the Russian Federation dated June 13, 2006 No. 373 “On the procedure for establishing standards for gas consumption by the population in the absence of gas meters” , Decree of the Government of the Russian Federation dated 05/06/2011 No. 354 “On the provision of utility services to owners and users of premises in apartment buildings and residential buildings”, Decree of the Government of St. Petersburg dated 09/13/2005 No. 1346 “On the Tariff Committee of St. Petersburg” and on based on the minutes of the meeting of the board of the Tariff Committee of St. Petersburg dated August 22, 2012 No. 679:

6. To approve, starting from 09/01/2012 in St. Petersburg, the consumption standards for public utilities for gas supply with natural gas in apartment buildings and residential buildings:

6.1. in residential premises in accordance with Appendix No. 9;

6.2. when using the land plot and outbuildings in accordance with Appendix No. 10.

8. Determine that when establishing standards for the consumption of utilities for heating, cold water supply, hot water supply, sewerage, electricity supply, natural gas supply, liquefied petroleum gas supply in the territory of St. Petersburg, a calculation method was used.

9.Recognize as invalid:

— order of the Tariff Committee of St. Petersburg dated May 26, 2010 No. 64-r “On establishing consumption standards for public utilities for gas supply with natural gas in St. Petersburg.”

10. The Order comes into force on September 1, 2012, but not earlier than the day of its official publication.

Appendix No. 9

to the order of the Tariff Committee

St. Petersburg dated August 22, 2012 No. 250-r

Utility consumption standards for natural gas supply

in residential premises in apartment buildings and residential buildings

on the territory of St. Petersburg

Standards for the consumption of natural gas used for cooking and heating water using gas appliances (m3/person per month)
if there is a centralized hot water supply for gas stoves	in the absence of centralized hot water supply
	for gas stoves and gas water heater	for gas stoves in the absence of a gas water heater
10,4	32,0	15,0

Item no.	Classification groups	Standards for the consumption of natural gas used for individual (apartment) heating of residential premises, m3/m2 per month
I.	Apartment buildings
1.	Pre-revolutionary houses that have undergone major renovations
one-story	8,20
above one floor	8,20
2.	Pre-revolutionary houses that have not undergone major renovations
one-story	8,20
above one floor	8,20
3.	Houses built 1918-1930. category "Constructivism" (above one floor)	8,20
4.	Houses built 1931-1956. category "Stalinist"
one-story	8,20
above one floor	8,20
5.	Houses built 1957-1970. category “Khrushchev brick” (above one floor)	8,20
6.	Houses built 1957-1970. category “Khrushchev panel buildings” (above one floor)	8,20
7.	Houses built 1970-1980. brick (above one floor)	8,20
8.	Houses built 1970-1980.

How are gas charges calculated without a meter in an apartment?

Any person, no matter where he lives, uses public services every day. These include water supply, sewerage, electricity, heating and, of course, gas supply in those houses where it is provided.

In order to regularly pay for such utility services, it is necessary to know not only the tariffs and payment procedures, but also the standards for the provision of these services, the rights and obligations of the user and the supplier.

That is why it is necessary to study the basic standards and requirements in order to not only know how much to pay, but also what should be provided for this money.

It is quite possible to live without natural gas. Almost half of residential apartment buildings in our country are equipped with electric stoves. It should be noted that this, among other things, is also more secure.

However, the other half still cooks their food on gas, and in addition, uses gas water heaters and gas boilers for heating.

It is for such citizens that we have tried to combine in this material the basic rules for the use of natural gas, the procedure for providing this utility service and the rules for determining tariffs. So that every homeowner or just a tenant can know how to act in any situation

Standards for providing services for centralized supply of natural gas to the population

Requirements for the procedure and standards for the provision of gas supply services are defined in Appendix No. 1 to the Decree of the Government of the Russian Federation of May 6, 2011 No. 354. Gas supply is a utility service for the centralized supply of natural gas to residential buildings, both apartment buildings and private ones.

Since gas is a source of increased danger in terms of fires or explosions, this service is provided according to strict rules. Technically, gas supply is a distribution network of natural gas in a populated area, in which natural gas is supplied via a gas pipeline directly to the gas equipment of subscribers.

Thus, there is a main gas pipeline and a city or village gas network . In this network, the gas is under a certain pressure. This pressure must be balanced, regardless of how much gas the subscribers consume, therefore, special devices are installed in the system - gas tanks, which compensate for uneven gas consumption.

After all, if the pressure drops, subscribers will not be able to use their gas appliances, and if the pressure increases, there is a danger of explosion.

Therefore, we must immediately make a digression and say that any manipulations with gas pipes and gas equipment should be carried out only by professional gas workers, and not by “Uncle Vasya the plumber” or the skillful hands of the homeowner. Gas is no joke.

After all, if the water supply is installed incorrectly or the electrical wiring is connected, the apartment is only in danger of local sweat or a short circuit. But for an incorrect connection or unauthorized manipulation of gas equipment, you can pay with the lives of yourself, your family and neighbors.

Therefore, you need to remember that if the pressure in the gas network suddenly drops, or gas workers carry out an emergency or planned gas shutdown, it is necessary to shut off the gas supply to the stove, water heater or gas boiler. For this purpose, a special valve is installed in each apartment or house.

In this situation, you can turn on the gas only after the command of the gas workers. Because at the moment of gas supply, excess pressure may arise in the network and this can lead to an explosion.

So, the gas supply of a residential building is an orderly system of subscriber branches that are connected to the city gas network. What is a subscriber branch? This is a system consisting of several system-forming points: gas supply directly to the subscriber, an intra-house gas pipeline and gas supply to the house itself.

It is noteworthy that it is possible to shut off the supply of natural gas to each residential building individually. For this purpose, there is a special valve located at a distance of at least two meters from the building line. Such a disconnecting device is located in a special well, in a complex, one for each residential building.

The gas pipeline enters a residential apartment building through the stairwells. At the same time, gas pipes leading to the kitchen are connected to each apartment through technical corridors. Technical corridors in the house are mandatory, since introducing gas directly into ventilation systems, elevator shafts or apartments is unacceptable.

Gas risers should be installed vertically in kitchens and staircases. Installing or moving gas communications to other parts of the apartment, for example, bathrooms, loggias or corridors, is unacceptable. When installing a gas boiler or water heater, it is mandatory to connect it to the ventilation system.

It should be noted that any gas supplying organization is obliged to enter into an agreement with subscribers not only for the supply of natural gas, but also for the maintenance of gas appliances . This service is mandatory and cannot be refused.

It is paid annually, based on gas appliances in the apartment, in accordance with the established tariff, which can be found out from the contract or on the supplier’s website. Every month, the company’s specialists are required to inspect the subscriber’s gas appliances and draw up a report on their condition and serviceability.

In the event of a malfunction, the gas appliance must be disconnected from the gas supply until it is repaired or replaced.

In some apartment buildings where there is no internal gas pipeline, but gas stoves are installed, it is allowed to use liquid gas in cylinders. Such gas cylinders with a volume of 50-80 liters are sold only by a gas company.

They are supplied tested, and residents are required to comply with safety standards when connecting them. They are installed in the kitchen directly next to the gas stove.

One cylinder of gas is approximately enough for one or several months, depending on the intensity of use.

Utilities: gas (all about gas, standards, calculation, formula, etc.)

panel (above one floor)

8.20 9. Houses built 1980-1999. inclusive of the category “New brick construction” (above one floor) 8.20 Houses built 1980-1999. inclusive of the category “New panel construction” (above one floor) 8.20 Dilapidated stock (wooden houses) (above one floor) 8.20 Houses built 1945-1948. category "German" (above one floor) 8.20 Houses built after 1999 category "New brick construction" (above one floor) 8.20 Houses built after 1999 category "New construction panel" (above one floor) 8 .20 Residential buildings 8.20 Houses built before 1999 inclusive 8.20 Houses built after 1999 8.20

Notes:

1. Standards for the consumption of utility services for gas supply with natural gas are established in accordance with the requirements for the quality of utility services provided for by legislative and other regulatory legal acts of the Russian Federation.

2. When determining utility consumption standards for natural gas supply, the design and technical parameters of an apartment building or residential building are taken into account: the material of walls, roofs, the volume of residential premises, the area of enclosing structures and windows, wear and tear of in-house engineering systems.

3. The consumption standard for gas supply utilities when using natural gas to heat water, using a gas water heater in the absence of other gas appliances and the absence of a centralized hot water supply corresponds to the difference between the natural gas consumption standards “for gas stoves and a gas water heater” and “for gas stoves in the absence of a gas water heater."

4. The utility consumption standard for gas supply with natural gas for general house needs is assumed to be 0.

5. The utility consumption standards for natural gas supply apply to dormitories and communal apartments.

Appendix No. 10

to the order of the Tariff Committee

St. Petersburg dated August 22, 2012 No. 250-r

Consumption standards for utility services for gas supply with natural gas when using land and outbuildings in St. Petersburg

Item no.	Direction of natural gas use	Units	Utility consumption standards for natural gas supply
Heating:
individual baths	m3/m3 per month	2,48
greenhouses		3,78
individual garages		3,96
Preparation of feed taking into account the steaming of roughage, root crops and tubers for farm animals:
Horse	m3/per 1 head of animal per month	4,15
Cow		10,39
Pig		20,77
Sheep or goat		0,99
Heating water for drinking and sanitary purposes	m3/per 1 head of animal per month	1,04
Preparation of wet bird food:
Chickens	m3/for 10 birds per month	0,21
Turkeys		3,12
Ducks, geese		4,15

How are prices for natural gas determined for the population?

Retail prices for natural gas are set by the Regional Energy Commission (prices for 2017–2018 were established by order of the Regional Energy Commission of the Omsk Region 80/32 dated June 20, 2017). To establish a uniform procedure for setting retail prices for gas sold to the population in all regions of the Russian Federation, Order 194-e/12 of the Federal Tariff Service of the Russian Federation dated November 23, 2004 approved “Methodological guidelines for regulating retail prices for gas sold to the population.”

Retail price includes:

wholesale price for natural gas;
payment for supply and sales services (PSSU) of the gas supplier;
gas transportation tariff.

Retail prices apply to volumes of gas that are used by the population for various purposes, with the exception of commercial ones. Directions of gas consumption for which retail prices are set separately:

cooking food;
hot water supply (water heating in the absence of centralized hot water supply);
heating of residential premises, gas consumption in the presence of gas consumption metering devices (in the case of using one metering device to record the volume of gas consumption while simultaneously using gas in several areas of its consumption, for which different retail prices are set).

Retail prices for natural gas

For 2017–2018 The following retail prices for natural gas have been established:

Direction of gas use	Retail prices for natural gas, rub./m³ including VAT
From July 1, 2020 to June 30, 2020
For cooking and heating water using a gas stove (in the absence of other uses of gas)	7,86
For heating water using a gas water heater in the absence of a central hot water supply (in the absence of other uses of gas)	7,86
For cooking and heating water using a gas stove and heating water using a gas water heater in the absence of a central hot water supply (in the absence of other uses of gas)	6,07
For heating with the simultaneous use of gas for other purposes (except for heating and (or) generation of electrical energy using boiler houses of all types and (or) other equipment that are in common shared ownership of the owners of premises in apartment buildings)	4,93
For heating and (or) generation of electrical energy using boiler houses of all types and (or) other equipment that are in common shared ownership of the owners of premises in apartment buildings	4,93

Tariff increase program

The Russian government has developed a scheme according to which tariffs for all housing and communal services, including gas, will increase over the course of 3 years. By 2020, bottled gas supply will increase by 4.1%. The cost of gas consumption through steam distributors will increase by 5%. But the most expensive tariffs will not be in the capital, but in the north of the country. This, of course, is associated with the cost of delivering fuel to the northern regions. According to forecasts, the next increase in gas tariffs should be expected at the end of this year or at the beginning of next. Oddly enough, gas prices for the population are growing faster than for enterprises. Today, one of the important tasks of the Russian government is to compare gas prices for these two categories. The authorities expect the following increase in gas prices:

How are my partial amounts determined? The new monthly charges you'll find on annual bills are based on your annual consumption, taking into account current prices for electricity, gas, water, wastewater and rainwater. When are partial amounts indicated? Monthly installments are always due on the first month of the month.

What is the cost of the job and the base price? The operating price is the price per kilowatt-hour of energy consumed. The base price serves to cover costs independent of consumption. The invoice shows the price of natural gas in kilowatt-hours, but my meter shows only cubic meters of consumption. How does this translate? Natural gas is measured volumetrically, i.e. in cubic meters. The working volume depends on pressure and temperature. The amount of natural gas measured in m3 is converted into kilowatt-hours so that it can be set without being influenced by pressure and temperature.

for housing, tariffs will increase by 8.5%, which is 1% more than the established indexation;
for enterprises, tariffs will increase by 7.5%, which is an indicator of general indexation.

Natural gas consumption standards

Standards for the consumption of utilities for gas supply of natural gas to the population in the absence of metering devices are determined by order of the Regional Energy Commission of the Omsk Region 673/79 dated December 30, 2014.

Utility consumption standards for natural gas supply in residential premises

p/p	Category of apartment (residential) building	Unit	Standard
1. For cooking
1.1.	Apartment and residential buildings equipped with a gas stove, when supplied with liquefied petroleum gas	kilogram per person per month	6,94
1.2.	Apartment and residential buildings equipped with a gas stove, when supplied with natural gas	cube meter per person per month	13,06
2. For heating water
2.1.	Apartment buildings and residential buildings equipped with a gas water heater (in the absence of a centralized hot water supply), with gas supply of liquefied petroleum gas	kilogram per person per month	10,00
2.2.	Apartment and residential buildings equipped with a gas water heater (in the absence of a centralized hot water supply), with natural gas supply	cube meter per person per month	19,52
2.3.	Apartment and residential buildings equipped with a gas stove and not equipped with a gas heater (in the absence of a centralized hot water supply), with gas supply of liquefied petroleum gas	kilogram per person per month	3,51
2.4.	Apartment and residential buildings equipped with a gas stove and not equipped with a gas heater (in the absence of a centralized hot water supply), with natural gas supply	cube meter per person per month	6,43
3. For heating residential premises (standards are calculated based on the duration of the heating period of 9 months)
3.1.	Apartment buildings and residential buildings with natural gas supply	cube meter per square meter of total living space per month	for heating stoves	for gas heating devices and boilers of various types
			11,37	10,13
3.2.	Apartment and residential buildings with gas supply with liquefied petroleum gas	kilogram per sq. meter of total living space per month	4,53

Consumption standards for utility services for gas supply with natural gas when using land and outbuildings

p/p	Direction of use of a communal resource	Unit	Standard
1. Heating of outbuildings located on a land plot with natural gas supply (standards are calculated based on the duration of the heating period of 9 months)
1.1.	Individual baths	cube

Gas tariffs for the population of the RS - fee with and without meter

meter per month per cubic meter meter of heated volume

3,921.2.Individual garages, cube. meter per month per cubic meter meter of heated volume 7,721.3.Greenhouse cubic. meter per month per cubic meter meter of heated volume 18,402. Cooking and heating water for cattle with natural gas supply 2.1. Horse cube. meter per month per animal head 5,202.2. Cow cube. meter per month per animal head11,332.3.Pigcub. meter per month per animal head 21,622.4. Sheep (goat) cubic. meter per month per animal head 2.013. Cooking food and heating water for birds when supplied with natural gas 3.1. Kurykub. meter per month for 10 poultry heads 0.213.2.Turkey cube. meter per month for 10 poultry 0.313.3. Ducks (geese) cubic. meter per month for 10 birds 0.41

Note: payment for utility services for gas supply is made within 12 months of the calendar year, or within 8 months during the heating season (based on the established volume of consumption of this utility service (standard) for each period) in accordance with the agreement concluded between the supplier and the consumer of the utility service.