When people are interested in the question: how many acres are in a hectare of land, this usually indicates land users or people who are just planning to purchase land for farming.
When we hear about hundreds or hectares, it immediately becomes clear that we mean the area of land. It is important to be able to measure a piece of land and translate the obtained data into the measurement measure that will be more appropriate in a given situation.
So, if land is purchased for a summer cottage, then future buyers want to know how many acres the plot occupies. If they plan to build a house on the land, then it is advisable to clarify the area in hectares.
Weaving is how much in other units of measurement
A hundred square meters of land is an area of 100 square meters. m. The unit of measurement is used mainly for small plots of land. To determine the size of premises, square meters are used, for large areas with an area of more than 5000 square meters. m. - hectares. If you need to designate the area of a region, region or country, use a unit such as a square kilometer.
To convert other units to hundreds, perform the following simple arithmetic operations:
- for hectares - multiply by 100, because 1 hundred square meters = 0.01 hectares;
- when converted to square kilometers - multiply by 10000 (one hundred square meters = 0.0001 sq. km);
- for meters - divide by 100 (one hundred square meters = 100 sq. m);
- for thousands of square kilometers, in which the size of countries and regions is sometimes measured, they are multiplied by 10 million - although such territories are never converted to hundreds.
Quantities that are multiples of a unit of measurement are such not entirely familiar units as a decare, which contains exactly 10 acres. In Thai paradise there are already 16 acres. And in an English acre there are approximately 40.5 acres - although this value cannot be called a multiple of the Russian one, and the calculations will turn out to be approximate.
In Russia, the officially used unit in documents is not “sotka”, but “ar”. These values are completely identical and equal to 100 square meters. m. The word “weaving” is usually used only in colloquial speech.
Why do we need hectares and acres?
In the Russian Federation, any land area is measured in hectares. Officially, the area can be measured using square meters (according to SI).
As a rule, the area of land for payment of land tax is determined in ha. The calculation method is as follows: measure the length and width of the site - determine its area. The result is converted into points and a personal coefficient is applied.
Hectares are used in the sectors of urban planning, agriculture, forestry, and when planning land management work. In addition, this unit is widely used in sports. The football field during construction is calculated exclusively in Ga.
Acres, as units of area, are used in the case of purchase and sale of land.
History of the term
Measuring small plots in hundred square meters is a tradition that is about 100 years old. In pre-revolutionary Russia, another name was used - ar. The French term was approved in 1795 and was eventually adopted by almost all countries of the world. The name “ar” (“are”) was translated as “square”.
The origin of the Russian word “weaving” has two versions:
- the term appeared because one hundred square meters is exactly one hundred square meters;
- a hundred square meters was named so because the area of a plot of this size is one hundredth of a hectare.
The term first appeared in the Soviet Union, when the population began to be allocated plots for dachas. The area of each was about 400-600 square meters. m. It was inconvenient to convert the value into hectares due to its small size. Therefore, the area of dacha plots was measured in acres.
Dividing plots into acres is a tradition in most countries of the world. Although they call the unit of measurement differently - ar. Completely different words and units are used to determine the size of a territory only in the United States and Great Britain. There, area is expressed in acres, square yards or miles.
Calculation examples - How many square meters in one hundred square meters
We have given an answer to the question: how many square meters are in a hundred square meters, so the next step is to give an example of an approximate calculation of the area.
So, let’s describe the measurement of a land plot step by step:
- To begin with, you need to drive four stakes around the entire perimeter of the site, i.e. at four corners to form borders.
- Then we arm ourselves with a tape measure to measure the length and width of the area. It is enough to measure only two sides, because... the other two will be the same size. Let's say that our length is 38 meters and width is 24 meters. We write down this data on paper.
- Let's remember our geometry lessons by calculating the area of a rectangle, i.e. S = a (length)* b (width). Total, S = 38 * 24 = 912 square meters.
- Now you need to find out how many acres are in this plot of land. To do this, the resulting area (912 m2) must be divided by 100. We got 9.12 acres.
- We measure the land plot in the same way as before.
- The resulting values were: length = 44 meters, width = 21 meters.
- Using the same formula we calculate: S = a * b, i.e. 44 * 21 = 924 square meters.
- We divide the resulting value by 100. In total, we get 9.24 acres - this is exactly the size of our second plot.
It is worth noting that if the land plot is more than one hundred acres, then for convenience the unit of measurement is used - a hectare, which is equal to these hundred acres.
Interesting facts ( How many square meters in one hundred square meters )
In general, one hundred square meters is not so much if you look at such a plot with your own eyes. Of course, theoretically, it is possible to build a 2-story house with a small extension on one hundred square meters, but as practice shows, it is better to build on a plot of about three hundred square meters, no less.
During Soviet times, the expression “ six hundred ” was in use, which arose approximately in the period from 1960 to 1970.
Initially, land plots were given to rural residents for their personal farming, but with the advent of the food crisis, the situation changed a little.
The Central Committee of the CPSU decided to allocate dacha plots to families living in cities so that they could build a small house on it, as well as plant a vegetable garden on the plot.
This was done for practical reasons, because in a similar way they planned to solve the problem of food shortages in cities, by growing various vegetables, berries and fruits on the plots.
Based on the logic of the leaders of those times, in order to feed a family of four , a certain amount of fruits and berries was required:
- apples - 65 kg per year;
- pears - 5 kg per year;
- plum - 3 kg per year;
- cherry - 6 kg per year;
- currants - 3 kg per year;
- gooseberries - 2 kg per year; raspberries - 4 kg per year;
- strawberries - 6 kg per year.
Why these particular products were chosen is unclear, but this is an unchangeable fact ! Thus, in order to grow this entire crop, at least five acres of land were required, and the last sixth is the territory on which the country house was built, based on the same calculations.
Sotka was already used at a completely official level, so this word, initially positioned as a colloquial word, can long ago be considered recognized in the business sphere.
I hope you liked the detailed answer on the topic: How many square meters in one hundred square meters . This article was published in the section – Construction.
Determination of plot area in acres
You can find out how many acres are in a garden or summer cottage in different ways.
The most accurate, although relatively time-consuming, method involves the use of pegs and a tape measure:
- First, the boundaries of the site are determined.
- Then pegs are installed at its corners (and most territories are a rectangle, or in extreme cases a trapezoid).
- Record the distances along each side.
- The results obtained are recorded on paper and calculations are performed.
The method is suitable even in cases where the sides of the site are not parallel. But in order to use it, you need a tape measure. If you don’t have a measuring device at hand, you can use improvised means. For example, a stick 1 meter long, which can be selected based on the known sizes of other objects.
Including:
- paving slabs (30 cm one side);
- rows of bricks, the height of which, taking into account the mortar, is 77 mm;
- human growth.
Knowing the length, it is easy to determine the dimensions of the plot and convert them into hundreds. It will be even faster to take measurements using a tripod made of three sticks in meter increments. Measuring a distance of 10 meters in each direction, you can get an area equal to 1 hundred square meters.
If, when determining the area of a territory, there are neither measuring instruments nor suitable sticks and objects whose sizes can be used to guide you, it is worth using an even more accessible method. True, the measurement accuracy will be low. The principle of measurement is based on the fact that the length of a human step with a height of about 180 cm is 0.7 m. And the answer to the question “how much is one hundred square meters of land” will be a square plot, which was measured by taking 14 steps in each direction.
The measurement results may require more serious processing and calculations before the exact area is obtained. If the plot is rectangular, it most likely cannot be divided into an integer number of squares with sides of 10 m. To determine the number of acres, multiply the results in meters for each side. For example, the area of a plot measuring 27 by 34 meters will be 918 square meters. m. Knowing how many meters are in one hundred square meters, you can get their number - 9.18. If the shape of the territory is a complex geometric figure, it will have to be divided into several simple ones.
How to convert linear meter to square meter?
Let's start by determining the length or width of a rectangle whose area is given in square meters. Assuming you need to use the following equation.
Square meters = linear meters in length * linear meters in width
This is an area calculation. Let's take a rectangle 10 meters long and 5 linear meters wide; it will have an area of 50 square meters.
To calculate the length in linear meters, you need to divide the area by the width in linear meters. So area in square meters/width in meters = linear meters, which is how we can calculate the length in meters!
First example
Imagine that you have an area of 400 square meters and a width of 9 meters, then the length in linear meters is:
Length = 400 square meters / 9 linear meters = 44.44 meters.
Second example
As in the previous step, if you want to calculate the width in linear meters, you need to divide the area by the length. That is, one square meter / length in meters width = linear meters.
Continuing with the data from the previous example, we know that the area is 400 square meters and the length is 44.44 linear meters, so:
Width in meters = 400 square meters / 44.44 linear meters = 9 linear meters.
Thus, the width is 9 linear meters.
Application of information about weaving
Knowing how much a hundredth is and how to convert it to other units, you can use this knowledge in everyday life. For example, when planning the construction of a house measuring 8 x 10 meters on a plot of 6 acres. In this case, it is easier to convert the area of the building in plan into these units of measurement. This will be 0.8 acres, and 5.2 acres of the dacha area will remain free, on which you can place a garage, greenhouse or bathhouse, plant a vegetable garden or arrange a garden. Their areas can also be indicated in the same units. And, although the term “weave” is usually not used for premises, it is quite suitable for calculating the territory of a dacha.
The calculation rules apply in both directions. And, if the ad states that a plot of 9 acres is for sale, buyers can imagine a square measuring 30 x 30 meters and plan the placement of other buildings and landscape design elements. On the other hand, plots are rarely square. And an area of 9 acres can mean an area measuring 20 x 45 meters, or 25 x 36 m, or even 22 x 41 m - the error in determining the area can reach several square meters.
The most difficult thing to deal with is areas of non-standard shape - triangular, trapezoidal, polygonal. And, although usually when setting the size of plots they try to make them at least rectangular, the terrain can adjust the results. To solve the problem, it is worth remembering the calculation formulas from school mathematics. It is preferable to break complex figures into several simple ones. Areas in acres or square meters are easily calculated for rectangular and other trapezoids or triangles.
How to convert acres to hundreds
If a current or potential landowner is interested in the question, 1 acre is how many acres, you can get the correct answer in different ways.
Online calculators
On the Internet you can find many useful sites that make life much easier. If for some purposes it is necessary to convert the area of a plot, expressed in English units of measurement, into familiar and understandable acres, you will need:
- Open any available Internet browser.
- Enter the appropriate request. For example, “area calculator”.
- The search engine will return many results, among which you need to choose the one that is most suitable or that you like.
Despite the fact that the interface of online calculators or converters may differ significantly, there is a general principle for their use:
- Enter the value in actual units.
- Select the unit of measurement to convert.
- Click the button that starts the conversion process (for example, “Start”, “Convert”, “Calculate”, etc.).
- Get the result.
Advice! When converting in different online calculators, the results may differ slightly. This is due to different options for rounding decimals to a whole number.
Independent calculations
For those who are not good at mathematics, converting acres into acres, hectares or other measures of area may seem like a very complicated procedure. But, if you need to find out how many acres are in 1 hectare urgently, you will have to try. The calculation is carried out as follows:
- It is known that 1 acre is equal to 4047 sq.m. There are 10,000 square meters in 1 hectare.
- Dividing 10,000 sq. m for 4047 sq. m we get the desired result: 1 ha = 2.47 ac.
What is a hectare
A hectare is a non-systemic unit of area measurement. It is equal to the area of a square with a side of 100 meters. 10,000 square meters is 1 hectare of land.
Hectares are used to refer to the area of large plots of land, primarily for agricultural purposes. Currently, in Russia, this unit of area measurement has been introduced as a non-systemic unit with no limitation on the period of use in the areas of application “agriculture and forestry”. OIML - the International Organization of Legal Metrology - in its recommendations classifies the hectare as a unit of measurement "which may be provisionally applied until a date fixed by national regulations, but which should not be introduced if not in use."
Interesting fact: this unit of measurement and its international designation - ha - were first introduced in 1879 by the International Committee of Weights and Measures. Today ha is accepted for use with other units of the International System of Units.
Before the introduction of the hectare, other measures of area were used in Russia.
For example, a tithe - it is approximately equal to a hectare. Also in everyday life, other measures of length were used, for example, a mile. It is equal to 1.6 kilometers. A sazhen was equal to 2.13 meters, an arshin was 0.71 meters, and one of the smallest units of measurement of length was the vershok - it was equal to 0.045 meters or 4.5 centimeters.
What other measures of area exist and when are they used?
We found out how many m² are in 1 hectare - 10 thousand m². In addition to the hectare, other measures of area are used in Russia: square kilometers, ares and square meters. The more familiar and common name for macaws is sotki. Each of the adopted area measures is applied in strictly defined situations.
Square kilometers
- the largest unit of area measurement used in Russia. This is a square with a side of 1,000 m, in one km² there are 1,000,000 m². Square kilometers are used to determine the area of cities, regions, districts, individual continents and even planet Earth. For example, the total area of our planet is 510,072,000 km². There are 100 hectares in one square kilometer. Accordingly, 1 ha is only 0.01 of one square kilometer.
